Autosock FAQ

	Frequently asked questions How do they work? What is it like driving with AutoSock?

How do they work?
It is well known that snow and ice sticks to textiles. AutoSock is made from 100% high-technology fibers. These fibers, which become hairier with use, are arranged in a specific pattern in order to optimize grip. The specially developed textile has the advantage of handling water film found between the icy and snowy road and the tire, (generated e.g. by heat from the sun, or wheel spin), thereby maximizing the grip.

How well do they work?
AutoSock is more effective than winter tires and are also more effective than snow chains in certain situations. They have been tested and formally approved by several leading car manufactures, and TÜV SÜD in Germany. Autosock can be mounted on summer tires and winter tires (with or without studs).

What sort of conditions can I use them in?
	They will improve traction on snowy or icy surfaces. It is recommended that you take them off when you get backto road conditions where no snow or ice is present, e.g. dry asphalt. During the approval test by TÜV, AutoSock passed the distance and durability requirement of the snow chain norm (ÖNorm 5117). Nevertheless asphalt & concrete driving is not recommended as it increases fabric wear considerably.

What's it like, driving with AutoSock?
AutoSock does not have the loud rattling and the bumpy ride which you associate with snow chains. Because there is no danger of damage to the vehicle structure they are approved for speeds up to 30mph, 50km/h; nevertheless your speed should of course be appropriate to the weather and road conditions.

If my car has ABS, can I use AutoSock?
Yes, AutoSock can be used with all electronics safety systems such as; ESP, ASC+T, ASR, ABS. In difference to other traditional friction equipment, AutoSock improves the performance of the electronic safety systems as such.

If my car is a four-wheel drive can I use AutoSock?
Yes, you should use it on the front axle.

On which tires should I use it?
AutoSock should be fitted to the driving wheels. for more info check mounting instructions

Which AutoSock size fits my tire?
Refer to the dimension table

Does the vehicle have to be jacked up to fit AutoSock?
No, just stop your car and engage the handbrake. Make sure the car is not in a slope during fitting. Pull the AutoSock over the driving tires and downwards as far as possible, and then move the vehicle approx. 1m, to pull the remainder into position. AutoSock will automatically become centered when you start driving. If you are stuck, do as above, but then make a small wheel spin instead of moving the car. For more info, check mounting instructions
What about when I take them off?
They're likely to be wet and probably dirty. Put them back in their storage bag - gloves are provided. When you get home, dry them and shake the dirt out, and then remember to put them back in the car for the next time!
Can I use my AutoSock to fit a different vehicle wheel size?
Yes, this is no problem if the AutoSock you have match the tire sizes of your other vehicle. To find the right tire size click here...

How many pairs do you get with a pack of AutoSock?
You get one pair, which is to be mounted on the driving wheels.

Are they approved for use on roads where snow chains are mandatory?
Per date, AutoSock is not approved as a snow chain according to the Önorm 5117. Nevertheless the areas where snow chains are mandatory are very limited.
If my car has limited space between the wheel and the mechanical parts can I use AutoSock?
Yes, AutoSock works even with vehicles which have low clearance between the tire and the body and between the tire and the suspension.